Power Problem
04-30-2008, 09:43 PM
#1
0 Watt CAFz'r
Thread Starter
Join Date: Mar 2008
Posts: 9
Power Problem
I currently am running a 1000w mono amp with two 4 ohm subs and to power I have a 1 farad cap.It ran well for a week after installation but after that week when it was about to hight a loud note in a song my stereo would shut of (Head unit included) what should I do..
Please respond
Please respond
04-30-2008, 11:10 PM
#4
no they just store energy for burt energy demands.
How ever if it uses a remote on and there is a remote on fault it can be anything that uses the remote on.
Sometimes the draw is to much on the remote on and its like a PC crashing or pluging in a harddrive when it is powered on and the PS is not hot swap able,Just shut down then click back on
Both of the things I said will do this
How ever if it uses a remote on and there is a remote on fault it can be anything that uses the remote on.
Sometimes the draw is to much on the remote on and its like a PC crashing or pluging in a harddrive when it is powered on and the PS is not hot swap able,Just shut down then click back on
Both of the things I said will do this
Thread
Thread Starter
Forum
Replies
Last Post
vip3r87
Car Audio Technical Discussions
6
12-03-2006 07:17 PM
edgar
Install related
13
11-08-2004 08:02 PM
