General Discussion General discussion about all things car audio, from pioneer, orion, alpine and eclipse.

Best way to protect a speaker from water

Old Jul 22, 2007 | 09:43 AM
  #1  
RedZone's Avatar
Thread Starter
500 Watt CAFz'r
 
Joined: Jan 2003
Posts: 708
Best way to protect a speaker from water

Hello all, I drive a 97 2 door Cavy and i recently found out my doors are letting in water during the rain. I know this as the wood baffles i made for my 5 1/4" components was soaking wet the one day i took the door panel off.

What would be the best way to protect the speakers from getting wet? Would foam baffles work?

I plan on pulling out the 5 1/4" and putting in 6 1/2's and relay do not want these speaker to get wet.

also would foam baffles protect my rear speakers that are installed on the back window sill from my sub woofers? ( ie the pressure from the subs pushing the speakers up and down)

and finally where would the cheapest place to buy the foam baffles be. Im located in Ontario

Thanks in advance
Old Jul 22, 2007 | 10:02 AM
  #2  
wiltshire559's Avatar
500 Watt CAFz'r
iTrader: (1)
 
Joined: Jun 2003
Posts: 774
does water build up on the inside of the door? and is this all the doors or just one
Old Jul 22, 2007 | 11:00 AM
  #3  
RedZone's Avatar
Thread Starter
500 Watt CAFz'r
 
Joined: Jan 2003
Posts: 708
not sure if its condensation, might be . but its in both doors.

i think i'm going to just go with the foam baffles and rebuild the wood baffles i made. was just looking for other ideas
Old Jul 22, 2007 | 12:31 PM
  #4  
2 8's AKA Jeepbeats's Avatar
4000 Watt CAFz'r
iTrader: (19)
 
Joined: May 2001
Posts: 5,644
Are you running 6x9's on the back dash? If so I have a brand new pair of XTC foam baffles for sale, if you want them.
Old Jul 22, 2007 | 03:25 PM
  #5  
MR2NR's Avatar
4000 Watt CAFz'r
iTrader: (66)
 
Joined: Dec 2003
Posts: 6,420
Make sure that the drain holes in the bottom of the door are not plugged for starters. You are going to get water in the door and lots of it, nothing you can do about it. Make sure your moisture barrier is still on the door as well. Make your adaptor template out of ABS or plastic of some kind, at the least, fibreglass your mdf.
Old Jul 22, 2007 | 06:02 PM
  #6  
theaudiodon's Avatar
50 Watt CAFz'r
 
Joined: Jul 2007
Posts: 148
if you dont have access to thick abs or some other easily workable plastic I would recomend MDX or 13 ply Marine plywood (baltic birch) MDX is treated MDF and is waterproof
You will never stop water from getting in the door all cars with windows get water in the door.
If you are useing XTC rain hats then cut them in half and use each half on the top of each door speaker. And they do nothing to protect your rear speakers they just choke em. The pressure you trying to protect them from is in front of the driver as well
Old Jul 22, 2007 | 07:03 PM
  #7  
dogstar's Avatar
50 Watt CAFz'r
iTrader: (2)
 
Joined: Sep 2006
Posts: 339
Go to walmart or zellers and get cheapie plastic cutting boards to make your baffles.

It may be hard to find one that is 3/4" of an inch thick, but if you look, usually you can double them up.
A bonus is that the plastic holds drywall screws much better than MDF.
Old Jul 23, 2007 | 09:03 AM
  #8  
Tom.F.1's Avatar
1000 Watt CAFz'r
iTrader: (1)
 
Joined: Feb 2006
Posts: 1,217
Canadian tire sell rubber speaker protectors. For 5-1/4 or 6-1/2 or 6x9. The 6x9 rubber thingy is great for protecting them from subs. It will limit bass, but it should be limited anyway if you have subs.

I had a 97 z24, never had a water problem, the vapor barrier the doors came with worked fine.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
_MD_
Car Alarm and Mobile Security
1
Mar 24, 2011 01:25 PM
d4rin
Car Audio Technical Discussions
14
Feb 21, 2011 07:19 AM
jeffreyM
General Discussion
27
Sep 24, 2007 03:32 PM
belcom
General Discussion
8
Apr 26, 2007 10:55 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:36 AM.