I can't decide help!
#1
I can't decide help!
#4
the flexibility of the rockford not shutting down on you @1ohm is very helpful vs the alpine only putting out 1000@1ohm.. (very few alpines have ever been 1ohm stable)
Alpine draws 175amps vs rockford drawing 300amps.. big difference for your electrical needs
23lbs rockford vs 15lbs alpine - (usual sign of build quality.. )
The alpine gets my vote for $$ value. roughly same power, footprint, dimensions, appearance ect.
499$ FOR THE ALPINE
Alpine MRX-M240 (MRXM240) Monoblock X-Power Class D Car Amp
General Features:
Monoblock X-Power Series Class D Car Amplifier
RMS Power Rating:
4 ohms: 1500 watts x 1 chan.
2 ohms: 2400 watts x 1 chan.
1 ohm: 1000 watts x 1 chan.
Sleek Aggressive Design w/ End Cap
Pulse Width Modulated MOSFET power supply
Wired remote bass level control included
LED power (green) and protect (red) indicators
Variable Bass Boost (0 to +12 dB bass boost at 50 Hz)
Soft start turn-on
Mono channel operation
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Heavy duty aluminum alloy heat-sink OR high-density split-dome convection heat-sink for extreme heat dissipation
Nickel-plated RCA level inputs
Nickel-plated screw terminals
Variable low-pass filter (50-400 Hz, 24 dB/octave)
Subsonic filter (5-30 Hz)
Frequency response: 5-400 Hz
4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
Dimensions: 18"W x 9"D x 2-1/4"H
935$ FOR THE ROCKFORD
Rockford Fosgate T2500-1bdCP (t25001bdcp) 2500W RMS Constant
General Features:
Constant Power Series Monoblock Class bD Car Amplifier
RMS Power Rating (14.4V):
4 ohms: 1,500 watts x 1 chan.
2 ohms: 2,500 watts x 1 chan.
1 ohm: 2,500 watts x 1 chan.
Dynamic Power Output: 2980 watts
Remote bass level input (Punch PEQ remote level control sold separately)
Blue L.E.D. Stealth Signal/Power Meters - monitors signal & voltage with simulated VU needle
LED power (blue), protect (yellow) and thermal (red) indicators
Variable Bass Boost (0 to +18 dB bass boost at 45 Hz)
Gyrator based punch EQ eliminates frequency shift with boost
Mono channel operation
PowerSync - allows 2 amplifiers to be "strapped" together
Audiophile grade speaker connections
Preamp Pass-Thru RCA outputs to daisy chain multiple amps
3-Way System Protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy duty cast aluminum convection heatsink with Direct Thermal Management evenly distributes heat across the entire heatsink for improved efficiency
Nickel-plated RCA level inputs
Nickel-plated clamp wire terminals
Input sensitivity:
Level: 150mV-4V
Variable low-pass filter (35-250 Hz, 24 dB/octave Butterworth)
Selectable Infrasonic filter (12 dB/Octave, -3dB at 28 Hz)
Phase Shift: 0-180 @deg;
Damping factor: >200
CEA-2006 compliant amplifier
Frequency response: 20-250 Hz
Designed and Engineered in the U.S.A.
External 300A fuse required and sold separately
Dimensions: 21-7/8"L x 8-3/16"W x 2-3/16"H
it's your money but at nearly half the price tag i'd go alpine.
Alpine draws 175amps vs rockford drawing 300amps.. big difference for your electrical needs
23lbs rockford vs 15lbs alpine - (usual sign of build quality.. )
The alpine gets my vote for $$ value. roughly same power, footprint, dimensions, appearance ect.
499$ FOR THE ALPINE
Alpine MRX-M240 (MRXM240) Monoblock X-Power Class D Car Amp
General Features:
Monoblock X-Power Series Class D Car Amplifier
RMS Power Rating:
4 ohms: 1500 watts x 1 chan.
2 ohms: 2400 watts x 1 chan.
1 ohm: 1000 watts x 1 chan.
Sleek Aggressive Design w/ End Cap
Pulse Width Modulated MOSFET power supply
Wired remote bass level control included
LED power (green) and protect (red) indicators
Variable Bass Boost (0 to +12 dB bass boost at 50 Hz)
Soft start turn-on
Mono channel operation
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Heavy duty aluminum alloy heat-sink OR high-density split-dome convection heat-sink for extreme heat dissipation
Nickel-plated RCA level inputs
Nickel-plated screw terminals
Variable low-pass filter (50-400 Hz, 24 dB/octave)
Subsonic filter (5-30 Hz)
Frequency response: 5-400 Hz
4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
Dimensions: 18"W x 9"D x 2-1/4"H
935$ FOR THE ROCKFORD
Rockford Fosgate T2500-1bdCP (t25001bdcp) 2500W RMS Constant
General Features:
Constant Power Series Monoblock Class bD Car Amplifier
RMS Power Rating (14.4V):
4 ohms: 1,500 watts x 1 chan.
2 ohms: 2,500 watts x 1 chan.
1 ohm: 2,500 watts x 1 chan.
Dynamic Power Output: 2980 watts
Remote bass level input (Punch PEQ remote level control sold separately)
Blue L.E.D. Stealth Signal/Power Meters - monitors signal & voltage with simulated VU needle
LED power (blue), protect (yellow) and thermal (red) indicators
Variable Bass Boost (0 to +18 dB bass boost at 45 Hz)
Gyrator based punch EQ eliminates frequency shift with boost
Mono channel operation
PowerSync - allows 2 amplifiers to be "strapped" together
Audiophile grade speaker connections
Preamp Pass-Thru RCA outputs to daisy chain multiple amps
3-Way System Protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy duty cast aluminum convection heatsink with Direct Thermal Management evenly distributes heat across the entire heatsink for improved efficiency
Nickel-plated RCA level inputs
Nickel-plated clamp wire terminals
Input sensitivity:
Level: 150mV-4V
Variable low-pass filter (35-250 Hz, 24 dB/octave Butterworth)
Selectable Infrasonic filter (12 dB/Octave, -3dB at 28 Hz)
Phase Shift: 0-180 @deg;
Damping factor: >200
CEA-2006 compliant amplifier
Frequency response: 20-250 Hz
Designed and Engineered in the U.S.A.
External 300A fuse required and sold separately
Dimensions: 21-7/8"L x 8-3/16"W x 2-3/16"H
it's your money but at nearly half the price tag i'd go alpine.
Thread
Thread Starter
Forum
Replies
Last Post
chillin 12345
General Discussion
4
06-24-2009 06:19 PM
tjknight
General SQ
14
02-02-2006 08:50 AM