thats like what i drew 17 pages ago

 

But it's a V. Hahahahha. I dunno I'm leaving this design up to Peter and Paul man.

 

Is the box that is being shown the one that MTA designed? I believe the concept of that box should work as long as all the tuning works out.

If it was going in my truck the V would be way wider but that's a personal preference.

 

MTA gave me the air space for the front and rear chambers with the ports sizes. 15 plus with 15.5x6x9 for the rear chamber and 6plus with 24x10x12 for the front port. I had deadlysones sketchup it with proper air space.

 

Dukk I agree 100%. The angle is too small, there won't be enought projection and too much compression for my liking.
I like 90degrees minimum. Unless it's a horn type design

who: post some dimensions of the truck for me. I'll see what can come up with

 

well then arm and leg pricing.

 

62"x18"x34" to the wheel well. 49"x18"x36"+. that give me room for beer and georcies in the back. Pauls been working on it for a while too man. im sure he would liek some of your advice as well.

 

hoel is 25.5"x11.5" but i can open it up if need be. the bottom of the cut is .75" from the bed floor(just marked out not totally cut yet). if theres anything else you need let me know and ill measure it up man. i would liek to keep the cut where it is height wise but width can change if needed. its a regular cab long box 94 CK pickup with a bench and im 6'3" 280lbs.

 

if this 6th just wont work ill do a 4th if need be. i just wanna hurt ppl when demoing it.

 

... had a hell of a time trying to fit 7.5 cubes per box and still keep the V shallow. Especially with a port in the middle and eliminating the wheel well cutout loading issues.

Have fun Peter! lol