FIT build begins
#43
18"x36 is correct of "Dynamat Extreme' - 3-3/4 sheets remaining. I should have enough for the hatch and corners of the trunk - won't look pretty but at least it will be covered.
My calculations were correct 16 sheets to do the entire floor, hatch, and trunk well and sides.
I haven't decided to do the headline just yet! Maybe - maybe not!
My calculations were correct 16 sheets to do the entire floor, hatch, and trunk well and sides.
I haven't decided to do the headline just yet! Maybe - maybe not!
#46
DAY 4
~ Removed the vent fan/blower(whatever it's called) not easy but took my time and removed it without a fuss.
~ Firewall drilling install Streewires 0/1 Bushing - Run 0/1 welding cable(techflex'd) to the batt - zip ties ever 6 inches or closer.
~ Applied adhesive cable ties and zip'd the 0/1, rca's(loomed) and remote/ground switch wire(fans).
Removed the battery
Done for day 4
Back at it day 6
~ Removed the vent fan/blower(whatever it's called) not easy but took my time and removed it without a fuss.
~ Firewall drilling install Streewires 0/1 Bushing - Run 0/1 welding cable(techflex'd) to the batt - zip ties ever 6 inches or closer.
~ Applied adhesive cable ties and zip'd the 0/1, rca's(loomed) and remote/ground switch wire(fans).
Removed the battery
Done for day 4
Back at it day 6
Last edited by avidedtr; 10-17-2008 at 12:03 PM.
#48
#50
Well today was all about the Kinetik Battery, InLine Fuses holders, and plexi top and bottom plates
Top plate isn't in just yet - OPINIONS YES or NO???
Let me know!
Cheers
Ju
Off to work - Midnights Argh!!!!!!