General Discussion General discussion about all things car audio, from pioneer, orion, alpine and eclipse.

Help! stereo cuts out

Thread Tools
 
Search this Thread
 
Old 01-29-2005, 05:17 PM
  #1  
0 Watt CAFz'r
Thread Starter
 
triple_XXX_kid's Avatar
 
Join Date: Jul 2004
Posts: 15
Post

Ive had my stereo installed in my cat for a couple of months now. it consists of a 15" XXX..db drive 1200, cdt 6.5" speakers and a db 290 powering them. Im runnin 4 guage from the battery to the amps. Now... i have not noticed any problems from this stereo at all but tonight i played a VERY bassy song, and before the bass would play the amp for the subs would go into protect for a split second and then go back to normal.. and every time heavy heavy bass was gonna play it did this. what do you think could be the problem? thanks guys
triple_XXX_kid is offline  
Old 01-29-2005, 05:46 PM
  #2  
Merry Christmass from CCA
iTrader: (2)
 
Sassmaster's Avatar
 
Join Date: May 2002
Posts: 2,579
Post

Did it happen after a few minutes of playing? you probly drew the battery down far enough that you were getting voltage drop on the bass hits, causing the amp to go into low voltage shutdown for a second, then when the alternator got enough voltage out, it turned back on. Usually when amps go into protect mode, they need to be shut down completely before they restart.

get a new battery and a bigger alternator when you can afford it.
Sassmaster is offline  
Old 01-29-2005, 06:13 PM
  #3  
0 Watt CAFz'r
Thread Starter
 
triple_XXX_kid's Avatar
 
Join Date: Jul 2004
Posts: 15
Post

well yea it was in the czr i was driving for a few minutes but it happend right away on that song, and would only shut off for those few bass notes
triple_XXX_kid is offline  
Old 01-30-2005, 01:08 PM
  #4  
0 Watt CAFz'r
Thread Starter
 
triple_XXX_kid's Avatar
 
Join Date: Jul 2004
Posts: 15
Post

i got a new battery and it is still doin it....anyone have any idea?
triple_XXX_kid is offline  
Old 01-30-2005, 02:33 PM
  #5  
2000 Watt CAFz'r
iTrader: (5)
 
Hardwrkr's Avatar
 
Join Date: Mar 2003
Posts: 3,542
Post

Double check that your grounds are fresh and clean.
Hardwrkr is offline  
Old 01-30-2005, 03:47 PM
  #6  
500 Watt CAFz'r
iTrader: (4)
 
92zed34's Avatar
 
Join Date: Dec 2004
Posts: 813
Post

Kinda makes me think of the 4 awg power wire?
Can a 4 awg supply enough current for that much wattage.
Im just curios about this cause im running the same size to my kx 1200,allthough ive had no problem with it shutting down?
92zed34 is offline  
Old 01-30-2005, 04:15 PM
  #7  
1000 Watt CAFz'r
 
coulter's Avatar
 
Join Date: Jun 2004
Posts: 1,024
Post

ya id check the grounds. i had the same problem a couple winters ago, a bit of condensation got on my ground, and the connection got all corroded. fixed it up and was just like new.
coulter is offline  
Old 01-30-2005, 04:28 PM
  #8  
4000 Watt CAFz'r
 
Blinddemonz's Avatar
 
Join Date: May 2003
Posts: 4,655
Post

Check the grounds and all your other connections make sure everything isn't coming unattached at all and make sure you have good grounds.

my 2 cents.
Blinddemonz is offline  
Old 01-31-2005, 10:21 AM
  #9  
4000 Watt CAFz'r
iTrader: (3)
 
Haunz's Avatar
 
Join Date: Jun 2002
Posts: 4,218
Post

You are current clipping, probably because of a bad ground as stated, or I wouldnt be surprised if your power wire is too small.....

15" of 4awg is only good for around 100amps before Vdrop getts bad.... if that amp isnt that effecient it could very well be exceeding that by alot....
Haunz is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1997 lx450
Install related
0
05-07-2012 11:37 AM
Sian
Car Audio Technical Discussions
2
08-29-2007 02:13 PM
Tcam76
Install related
14
08-03-2007 02:42 PM
KingBoss06
Install related
9
04-08-2007 05:08 PM
mp04uz
Install related
3
10-26-2006 07:29 PM



Quick Reply: Help! stereo cuts out



All times are GMT -5. The time now is 09:00 AM.