Lord Huggington

iTrader: (1)

Designed for an SSA Dcon in optimum space, not that you can't use any 12. All must have 4.5 cubes and be between 30-35hz.

I disagree. I think 5/10 people that buy 2 Dcon 12's also want an optimum sized ported enclosure for their smallish trunk. If you're buying entry-level subs than you probably don't want to make a box. Carpeted, .25" rabbit joints, resin inside, sanded port walls, and double baffled sounds like a good deal to me. I paid $300 for a ported 12" box because I was ripped off. My box had none of that - just carpet. Notice that most of the trunks are different sizes and you're screwed for an exact 4.5 cubes if the opening is off by .5" on L or W.

thorshammer, easy..

15.5 x 35(30.28+.75" MDF+3.97 port width) x 22/1.26" & .75" spacing/.75" MDF/4.5cf3 (4.78)/55.58 sq. in. port area (12.35 per)/30.77hz, no inverting. No double baffle, not that it needs it.

Is that a GT? I had an 00 GT.

Dukk

I don't want to poo-poo on your plans but Jalat is right - people either want to drop $69 on a cheap box or they'll buck for a custom one, or they'll just build it themselves.

The box game is a tough one - most prefabs are built fairly decently now, the margins are tight, and shipping can be a killer on small orders.

Lord Huggington

iTrader: (1)

I think I could sell all I make, albeit slowly. It's not a bad investment for me.